Granite Countertop Image
 
Santa Cecilia Gold Granite From Brazil WhatsApp Logo

Please click on image to enlargen, this is an average sample only. Your monitor settings may affect appearance.

Santa Cecilia Gold Granite Image Santa Cecilia Gold Granite Polished Slab Image

Description: Santa Cecilia Gold Granite is a medium to coarse-grained, yellow-brown gneiss with garnet and sillimanite of the Precambrian period. This stone internationally may be nominated as a granite but in the area of application of the European Standard this stone must be nominated as a gneiss. The veining and colour varies considerably and a small sample of Santa Cecilia Gold granite may not be representative of the whole slab therefore swatch samples must be approved for large projects to ensure that the blocks are all extracted from the same quarry face for matching purposes. During the polishing process a clear epoxy resin filler may be used to fill any micro fissures or tiny pitting however this does not affect the integrity of the stone, it merely provides an even smoother surface finish. Ideal for both interior and exterior use, Santa Cecilia Gold Granite is frost free and polish constant.

Products: Suitable for construction projects both commercial and domestic, prefabricated countertops/worktops, vanities, tiles, backsplashes, paving, fireplaces and memorials.

Premium Quality Slab Sizes 2 & 3cm
When available Jumbo Gangsaw Slabs 3000+mm x 2000+mm (118"+ x 78"+)

Standard Slab Sizes 2 & 3cm
Large Gangsaw Slabs 2800mm & above x 1800mm & above (110"+ x 71"+)
Medium Gangsaw Slabs 2800mm & above x 1400mm & above (110"+ x 55"+)
Mini Gangsaw Slabs 2200mm & above x 1200mm & above (86"+ x 47"+)
Vertical Cutter Slabs 2200mm & above x 600~900mm (86"+ x 24~36"+)

Granite Countertops 2 & 3cm
Free length or made to your dimensions, standard sizes are
2400~3200 x 600/630/700/900/1000/1200/1220 x 30 mm (94~126" x 24~48")

Memorial/Monumental Slabs
50mm through to 200mm thick are cut to customer specifications, please Contact Us with the material(s), sizes and finishes you require.

Calibrated Tiles: Standard sizes available are:

305 x 305 x 10 mm (12" x 12" x 3/8")
610 x 305 x 10 mm (24" x 12" x 3/8")
400 x 400 x 10 mm (15 3/4" x 15 3/4" x 3/8")
457 x 457 x 10/12 mm (18" x 18" x 3/8~1/2")
305/400/457 mm x Freelength for you to cut to length on site, usually no longer than 2000 mm (78")
600 x 600 is available however usually a minimum 15/18/20 mm thick to ensure material stability

More granite tile and production information.

Surface Finish: Santa Cecilia Gold Granite looks best with a gloss polished surface but is also available as honed, leather/satin, river-washed/antique, thermal/flamed, brushed and sandblast finish. We never use colour enhancers.

Sealing: Test with a small sample. It is probable that a sealant can be used on Santa Cecilia Gold granite however excessive attempts at sealing it could actually create a residue film build-up.

Block Sizes: This is a quarry yielding selectable, grades of granite with blocks suitable for gangsaw size down to economical tile-sized blocks. For commercial projects it is important to ensure that blocks are selected from the same quarry face.

Rough blocks are usually exported by Break Bulk however intermodal containerisation is available at extra cost. Finished products are packed into sea-worthy wooden crates and loaded into containers.

Quarry Location: Santa Cecilia Gold Granite is from a sheet bedrock quarry near RN 000147 Corrego Agua Santa, Ecoporange, Espirito Santo, Brazil.

Synonyms: Amarelo Santa Cecilia, Amarillo Santa Cecilia, Giallo Cecilia, Giallo S. Cecilia, Giallo S. Cecilia Original, Giallo San Cecilia, Giallo Santa Cecilia, Giallo St. Cecilia, Gialio Santa Cecilia, Giallo Tipo S. Cecilia, Juparana Santa Cecilia, S. Cecilia, Santa Cecilia, Santa Cecilia Yellow, St. Cecilia, Sta. Cecilia, Sta. Cecilia Alcir, Yellow Santa Cecilia, Yellow St Cecilia

Gneiss: A high grade metamorphic rock. Gneiss is medium to coarse-grained and may contain abundant quartz and feldspar, which some petrographers regard as essential components. The banding is usually due to the presence of differing proportions of minerals in the various bands; dark and light bands may alternate because of the separation of mafic (dark) and felsic (light) minerals. Banding can also be caused by differing grain sizes of the same minerals. The mineralogy of a particular gneiss is a result of the complex interaction of original rock composition, pressure and temperature of metamorphism, and the addition or loss of components.

Mineral Composition: Average Microperthitic Orthoclase: 34%, Quartz: 25%, Plagioclase: 20%, Biotite: 10%, Garnet: 7%, Accessories: 4%.

Technical Specifications

Bulk Density: 2647 kg/dm3

Bending Strength: 7.21 N/mm2

Compression Breaking Load: 103.6 N/mm2

Abrasion Resistance: 0.60 mm

Water Absorption: 0.32%

Hardness (Moh's Scale):

Note: These figures and details are given for guidance purposes only, no reliance should be taken as to their accuracy.


Contact Us