Labrador Green Granite From Brazil
Please click on image to enlargen, this is an average sample only. Your monitor settings may affect appearance.
Description: Labrador Green granite is a coarse-grained, dark green quartz monzonite of the Precambrian age. This stone internationally may be nominated as a granite but in the area of application of the European Standard this stone must be nominated as a monzonite. During the polishing process a clear epoxy resin filler may be used to fill any micro fissures or tiny pitting however this does not affect the integrity of the stone, it merely provides an even smoother surface finish. Labrador Green granite is suitable for both interior and exterior use futhermore is frost resistant and with a constant polish.
Products: Suitable for construction projects both commercial and domestic, prefabricated countertops/worktops, vanities, tiles, backsplashes, paving, fireplaces and memorials.
Surface Finish: Labrador Green granite looks best with a gloss polished surface but is also available as honed, leather/satin, river-washed/antique, thermal/flamed, brushed and sandblast finish.
Sealing: Test with a small sample. It is possible that a sealant can be used on Labrador Green granite however excessive attempts at sealing it could actually create a residue film build-up.
Block Sizes: This is a quarry yielding selectable, grades of granite with blocks suitable for gangsaw size down to economical tile-sized blocks. For commercial projects it is important to ensure that blocks are selected from the same quarry face.
Rough blocks are usually exported by Break Bulk however intermodal containerisation is available at extra cost. Finished products are packed into sea-worthy wooden crates and loaded into containers.
Quarry Location: Labrador Green granite is quarried near quarry RN 000166, Estrada Mutum Preto, Alto Mutum, Baixo Guandu, Espirito Santo, Brazil.
Synonyms: Green Labrador, Verde Labrador.
Quartz Monzonite (Adamellite): An intrusive, felsic, igneous rock that has an approximately equal proportion of orthoclase and plagioclase feldspars. It is typically a light colored phaneritic (coarse-grained) to porphyritic granitic rock. The plagioclase is typically intermediate to sodic in composition, andesine to oligoclase. Quartz is present in significant amounts. Biotite and/or hornblende constitute the dark minerals. Because of its coloring, it is often confused with granite, but whereas granite contains more than 20% quartz, quartz monzonite is only 5-20% quartz. Rock with less than five percent quartz is classified as monzonite. A rock with more alkali feldspar is a syenite whereas one with more plagioclase is a quartz diorite. The fine grained volcanic rock equivalent of quartz monzonite is quartz latite.
Petrographic Composition: Average Plagioclase (Andesine) 30%, Microperthitic Microline 30%, Quartz 15%, Biotite 13%, Hornblende 7%, Othopyroxene 5%
Bulk Density: 2690 kg/dm3
Bending Strength: 9.90 N/mm2
Compression Breaking Load: 146.00 N/mm2
Abrasion Resistance: 0.35 mm
Water Absorption: 0.26%
Hardness (Moh's Scale):
Note: These figures and details are given for guidance purposes only.