Granite Countertop Image
 
Ebony Black Granite From Sweden Telegram Logo

Please click on image to enlargen, this is an average sample only. Your monitor settings may affect appearance.

Ebony Black Granite Image Ebony Black Granite Image

Description: Ebony Black granite / Boalt Standard / Gylsboda Black is a fine-grained black diabase quarried near Gylsboda, Sweden. This stone internationally may be nominated as a granite but in the area of application of the European Standard this stone must be nominated as a basalt. A small sample of Ebony Black granite is usually representative not having a wide variation in colour and veining however swatch samples must be approved for large projects to ensure that the blocks are all extracted from the same quarry face for matching purposes. During the polishing process a clear epoxy resin filler may be used to fill any micro fissures or tiny pitting however this does not affect the integrity of the stone, it merely provides an even smoother surface finish. Ebony Black Granite is suitable for both interior and exterior use futhermore is frost resistant and with a constant polish.

Products: Suitable for construction projects both commercial and domestic, prefabricated countertops/worktops, vanities, tiles, backsplashes, paving, fireplaces and memorials.

Premium Quality Slab Sizes 2 & 3cm
When available Jumbo Gangsaw Slabs 3000+mm x 2000+mm (118"+ x 78"+)

Standard Slab Sizes 2 & 3cm
Large Gangsaw Slabs 2800mm & above x 1800mm & above (110"+ x 71"+)
Medium Gangsaw Slabs 2800mm & above x 1400mm & above (110"+ x 55"+)
Mini Gangsaw Slabs 2200mm & above x 1200mm & above (86"+ x 47"+)
Vertical Cutter Slabs 2200mm & above x 600~900mm (86"+ x 24~36"+)

Granite Countertops 2 & 3cm
Free length or made to your dimensions, standard sizes are
2400~3200 x 600/630/700/900/1000/1200/1220 x 30 mm (94~126" x 24~48")

Memorial/Monumental Slabs
50mm through to 200mm thick are cut to customer specifications, please Contact Us with the material(s), sizes and finishes you require.

Calibrated Tiles: Standard sizes available are:

305 x 305 x 10 mm (12" x 12" x 3/8")
610 x 305 x 10 mm (24" x 12" x 3/8")
400 x 400 x 10 mm (15 3/4" x 15 3/4" x 3/8")
457 x 457 x 10/12 mm (18" x 18" x 3/8~1/2")
305/400/457 mm x Freelength for you to cut to length on site, usually no longer than 2000 mm (78")
600 x 600 is available however usually a minimum 15/18/20 mm thick to ensure material stability

More granite tile and production information.

Surface Finish: Ebony Black Granite looks best with a gloss polished surface but is also available as honed, leather/satin, river-washed/antique, thermal/flamed, brushed and sandblast finish.

Sealing: Test with a small sample. It is most unlikely that a sealant can be used on Ebony Black granite and excessive attempts at sealing it could actually create a residue film build-up.

Block Sizes: This is a quarry yielding selectable, grades of granite with blocks suitable for gangsaw size down to economical tile-sized blocks. For commercial projects it is important to ensure that blocks are selected from the same quarry face.

Rough blocks are usually exported by Break Bulk however intermodal containerisation is available at extra cost. Finished products are packed into sea-worthy wooden crates and loaded into containers.

Quarry Location: Ebony Black granite is quarried near Boalt, Gylsboda, Skane, Sweden. Quarry commenced in the late 1800s.

Synonyms: Boalt Standard, Gylsboda Black, Gylsboda Basalt, Swedish Ebony Black

Basalt: An extrusive igneous (volcanic) rock that is low in silica content, dark in colour, and comparatively rich in iron and magnesium. Some basalts are quite glassy (tachylytes), and many are very fine-grained and compact. It is more usual, however, for them to exhibit porphyritic structure, with larger crystals (phenocrysts) of olivine, augite, or feldspar in a finely crystalline matrix (groundmass). Olivine and augite are the most common porphyritic minerals in basalts; porphyritic plagioclase feldspars are also found. Basaltic lavas are frequently spongy or pumiceous; the steam cavities become filled with secondary minerals such as calcite, chlorite, and zeolites.

Basalts may be broadly classified on a chemical and petrographic basis into two main groups: the tholeiitic and the alkali basalts. Tholeiitic basaltic lavas are characterized by calcic plagioclase with augite, pigeonite or hypersthene, and olivine (rarely) as the dominant mafic minerals; basalts without olivine are also well represented. Tholeiitic basalts, which contain 45 to 63 percent silica, are rich in iron and include the tholeiites (basalts with calcium-poor pyroxene).

Mineral Composition: Average by % Plagioclase 66%, Pyroxene 29%, Opaques 4%, Biotite 1%

Technical Specifications

Compressive Strength: 254 MPa

Flexural Strength: 29.9 MPa

Tensile Strength After Freeze-Thaw Cycles: kg/cm2

Unitary Modulus Of Bending Tensile Strength: kg/cm2

Water Imbibition Coefficient: <0.1%

Mass By Unit Of Volume: 3000 kg/m3

Hardness (Moh's Scale):

Note: These figures and details are given for guidance purposes only, no reliance should be taken as to their accuracy.


Up Arrow

Contact Us