Granite Countertop Image
 
Antique Brown Granite From Angola WhatsApp Logo

Please click on image to enlargen, this is an average sample only. Your monitor settings may affect appearance.

Antique Brown Granite Image

Description: Antique Brown Granite is a very coarse-grained, black-brown anorthosite of the Precambrian period. This stone internationally may be nominated as a granite but in the area of application of the European Standard this stone must be nominated as an anorthosite. During the polishing process a clear epoxy resin filler may be used to fill any micro fissures or tiny pitting however this does not affect the integrity of the stone, it merely provides an even smoother surface finish. Antique Brown Granite is suitable for both interior and exterior use futhermore is frost resistant and with a constant polish.

Products: Suitable for construction projects both commercial and domestic, prefabricated countertops/worktops, vanities, tiles, backsplashes, paving, fireplaces and memorials.

Surface Finish: Antique Brown Granite looks best with a gloss polished surface but is also available as honed, leather/satin, river-washed/antique, thermal/flamed, brushed and sandblast finish.

Sealing: Test with a small sample. It is possible that a sealant can be used on Antique Brown granite however excessive attempts at sealing it could actually create a residue film build-up.

Block Sizes: This is a quarry yielding selectable, grades of granite with blocks suitable for gangsaw size down to economical tile-sized blocks. For commercial projects it is important to ensure that blocks are selected from the same quarry face.

Rough blocks are usually exported by Break Bulk however intermodal containerisation is available at extra cost. Finished products are packed into sea-worthy wooden crates and loaded into containers.

Quarry Location: Antique Brown granite is quarried near Sa da Bandeira, Lubango, Angola.

Synonyms: Brown Antique, Marrom Antik

Anorthosite: A phaneritic, intrusive igneous rock characterized by a predominance of plagioclase feldspar (90-100%), and a minimal mafic component (0-10%). Pyroxene, ilmenite, magnetite, and olivine are the mafic minerals most commonly present.

Mineral Composition: Average by %

Technical Specifications

Compression Tensile Strength: 2326 kg/cm2

Tensile Strength After Freeze-Thaw Cycles: 2181 kg/cm2

Unitary Modulus Of Bending Tensile Strength: 143 kg/cm2

Heat Expansion Coefficient: 0.0050 mm/mC

Water Imbibition Coefficient: 0.001300

Impact Strength: 82 cm

Frictional Wear: 0.7 mm

Mass By Unit Of Volume: 2540 kg/m3

Hardness (Moh's Scale):

Note: These figures and details are given for guidance purposes only, no reliance should be taken as to their accuracy.


Contact Us